a.pngb.pngc.pngd.pnge.pngee.pngf.pngg.pngh.pngi.pngj.pngk.pngl.pngm.pngn.pngo.pngp.pngq.pngr.pngs.pngt.pngu.pngv.pngw.pngx.pngy.pngz.pngz3.pngz4.pngz5.pngz6.pngz7.pngz8.pngz99.png
Monday, 25 May 2020
Monday, 05 Xordād 1399
الإثنين, ۰۱ شوال ۱۴۴۱

Turret Lathe

Applications:                           top and bottom lathing and drilling simultaneously.

Accuracy:                                0.05 mm

Max operational load:             5 ton

Max operational diameter:      up to 3 m

Min operational diameter:       200 mm

Max operational height:          1.5 m

 

CNC Rotary Cutter

Applications:                           drilling, bottom lathing, angle cutting and cutting various shapes

X axis operational length:       3 m

Y axis operational length:       1 m

Height:                                    1.5 m

Accuracy:                                0.01 mm

 

Polish Cutter

Operational width (Z):            50 cm

Operational length (X):           1 m

Operational height:                 70 cm

 

Boring Machine

Application:                            longitudinal drilling, flat and circular lathing

Operational width (Z):            2 m

Operational length (X):           1 m

Operational height:                 1.5 m

Spindle length:                        1 m (with ability to move forward)

Radial Drill

Application:                            drilling and tapping in different angles

Operational height:                 1.5 m

Operational diameter:             6 m

Heavy lathe

Application:                            dimensional, circular, top and bottom lathing

Operational length:                 5 m

Operational diameter:             2 m (1.8 m is for support)

Light lathe

Application:                            circular lathing and drilling

Operational diameter:             50 to 260 cm

USA Piece Opening Lathe

Application:                            circular lathing and drilling

Operational length:                 1.5 m

Operational diameter:             70 m

Shaping Machine

Application:                            bottom and frontal lathing, teaseling

Operational length:                 80 cm

Operational width:                  50 cm

Operational height:                 40 cm

Rolling Machine

Max plate thickness:               25 mm

Max plate width:                     2.5 m

Min inside diameter:               250 mm

CNC Air-Gas Cutter

Note:                                       This machine only cuts steel plates and can’t cut any alloyed steel plate

Thickness:                               4 mm to 150 mm

Used gases:                             Air, CO2, N2

CNC Plasma Cutter

Note:                                       This machine cuts iron and steel plates

Table size:                               1.5 m × 2 m

Thickness:                               0.06 mm to 20 mm

Used gases:                             Air, CO2, N2

CNC Water Jet Cutter

Application:                            Cutting any material likes wood, metal, glass, stone etc.

Table size:                               2 m × 6 m

Kerf cutting nuzzle size:         0.76 mm nuzzle outlet

Static and Dynamic Balance Machine

  • Balance up to 3 ton, it is possible to increase load up to 7 ton by changing standings
  • Dynamic and static balancing
  • Maximum length of 6 m
  • Variable rotation speeds for each part
  • Rotation speed ranges from 60 rpm to 15000 rpm
  • Balance with adding or removing load.
a.pngb.pngc.pngd.pnge.pngee.pngf.pngg.pngh.pngi.pngj.pngk.pngl.pngm.pngn.pngo.pngp.pngq.pngr.pngs.pngt.pngu.pngv.pngw.pngx.pngy.pngz.pngz3.pngz4.pngz5.pngz6.pngz7.pngz8.pngz99.png
Real Time Web Analytics